Plasticine machine step by step. How to make a plasticine machine.

1. Workspace organization
2. How to make military equipment?
3. Sculpting machines for fire service
4. Phased photo lesson:
5. Fire engine
6. Urban transport
7. Passenger car
8. Below is a phased master class:
9. Tank
10. Video
11. Sculpt, roll, fasten
12. In case of fire, call 101
13. Necessary materials:
14. Necessary materials:
15. How to make a car out of plasticine
16. How to blind from plasticine truck
17. How to blind from plasticine race car

When a child has already grown considerably, sometimes the question arises how to make a car out of clay, since a clay can be considered an excellent means for organizing the leisure of a child.

When referring to the information presented below, you will find answers to the following questions:

• how to make a car;
• at what age the kid can do handicrafts;
• how to organize workplace little master

Of course, the acquaintance of the child with clay can take place at any age, but it is better to study directly from this material only after 2, or even 3 years.

It is at this age that the small master is already able to knead and roll clay independently, to form various forms of it (circle, square, etc.).

Workspace organization

In order for the molding process to be most comfortable not only for the baby, but also for the mother, it is recommended to pay attention to the following points when organizing the workplace:

1. The creative process should take place at the table. This can be either an ordinary kitchen table or a special children's table. Thanks to manufacturers of products for children, choose a table that will appeal to the little master, is not difficult. In no case should the child be allowed to sculpt on a bed, sofa or on the floor.
2. It would be nice to get a special board for modeling, as well as a knife (stack) for cutting clay. The board can be purchased at any office supply store, and a plastic knife for cutting, as a rule, comes bundled with clay.
3. It would be useful if the baby can first get acquainted with the example of what he has to fashion. To do this, it is enough to have in front of your eyes a picture of what should happen to him (flower, snowman, car, caterpillar, etc.).

How to make military equipment?

In order to make a military truck with your own hands, you need clay only 2 colors - green and black.

Consider the process of modeling in stages:

1. 4 identical pieces are separated from the black plasticine using a plastic stack. Further, the wheels of the future truck are formed from the resulting blanks. By the way, with the help of a toothpick you can draw discs on wheels.
2. Using green clay, sculpt the body. To do this, 5 rectangles are formed, 1 of which will serve as the base of the machine from clay, and the remaining 4 will be its sides. The size of the figures must be determined independently based on the size of the future truck and the wheels already prepared.
3. Further, a figure in the shape of a square, which will serve as the cabin of the future car, is molded from green plasticine. In the same way as before (with the help of a toothpick), headlights, doors, windows and other elements are drawn near the cab.
4. Finally, the moment of assembling a military truck has arrived: the sides of the body are fixed to the base of the body, the cabin is fixed to the front side, the resulting construction is placed on the wheels.

Crafts are ready! If desired, it can be supplemented with a trailer. The trailer is molded by analogy with the truck itself, excluding the stage of creating the cab.

You can experiment with the colors of the truck. For example, make the cab yellow and the body red. It all depends on the imagination and color preferences of the little author.

Sculpting machines for fire service

In order to make a fire truck of clay, you need the source material of 3 colors. Namely: black, red and white.

Initially molded wheels. To do this, from a piece of black plasticine is separated 6 identical pieces the size of a pea. Plasticine is warming up, and wheels are formed from it. With the help of a toothpick on wheels, wheels are simulated.

Next, take a bar of red clay, from which is the cabin and the body of the future fire truck. For the body will need 2/3 of the piece, and for the cabin - the remaining 1/3. A figure is formed from a smaller piece in the form of a square, and from a larger one - in the form of a rectangle. The headlights, windows and doors of the cabin can be drawn with the help of a toothpick, or you can mold it out of white plasticine.

The resulting blanks are interconnected, then the previously prepared wheels are stuck to them.

Now you can do the modeling of accessories inherent to this species special machinery. It's about the fire escape and the hose.

In order to make a staircase, it is necessary to form a flat rectangle out of white plasticine, on which the main elements - handrails and supporting steps will be fixed. These components of the fire escape are made of black clay. Once they are ready, to assemble the structure is not difficult.

How is the hose done? A thin flagellum is rolled out of a small piece of white plasticine, which should be rolled up in the shape of a snail house (in a circle).

At the end of the process, the ladder is fixed on the upper part of the body, and the rolled hose is on the side. Fire truck ready!

Print Thank you, great lesson +12

Perhaps the little machine is the most popular toy for boys. But sometimes girls are interested in this technique. We suggest you make a small car from plasticine. Many immediately dismiss such an idea, considering such a venture to be empty and impracticable. But here we will prove to you the opposite. Look carefully at the photos, each step shows that there is nothing difficult in the process of modeling clay cars. Anyone can repeat the sculpting, even if he does not have a special artistic taste , and children will be happy to start modeling under the leadership of adults, because there is nothing more exciting than joint activities. So, do not delay, proceed.

Phased photo lesson:

Choose a color for body modeling. Expect that this material will be the main, and additional shades: black and gray (blue). Roll a large ball from the main bar, but leave about a third of the material.

Pull the ball into an oblong bar, oval on one side. Such a detail will be obtained if the clay is pressed down with a palm on all sides to a solid surface.

Also use the remaining piece of plate to make a ball and stick it on top.

Form the cab of the machine, smoothing all the transitions between parts and leveling the surface of clay.

After the outlines of the body of the machine will be ready, stick the windshield and rear window, using for this gray or blue pieces of clay.

Attach also glass and sides.

Reverse round side stacks or some other subject suitable form push through the notches for the wheels.

Attach four black wheels. Stack set the topography of the body and push holes for headlights, attach the rear-view mirrors.

The last small details: numbers, headlights, wipers and other.

A plasticine machine has every chance of becoming a child’s favorite toy, so that it stays intact for longer, freeze the craft in the fridge. And the basis of the wheels can be laid wooden axes of matches or toothpicks, then the wheels can even rotate.

All boys love cars. They play with them, draw them, collect from the designer and mold from plasticine. This article will explain several options for how to make a car out of clay. Here are a few step-by-step master classes. Let's start with the fire truck.

Fire engine

In order to blind the fire truck, you need plasticine of five colors: red, white, black, yellow and blue. You also need a stack and a match or a toothpick. Let's start:

1. Let's make two balls: one is bigger, the other is smaller.
2. Let's make a volumetric rectangle from each ball. From the smaller rectangle we will make a cab - we cut out the engine compartment with a stack.
3. Fasten the two parts of the bottom sausage of black clay.
4. Let's make the wheels. From black plasticine blind four thick tortillas and stack put on the edge of the notch. The rear wheels will do a bit more front.
5. Make four cakes of yellow plasticine and in the middle of each small depression. Next stick the yellow cakes to the black wheels.
6. Attach the wheels to the cab and the car body.
7. Let's make a few sausages of gray plasticine: 2 thicker and 5-6 thinner - it will be a ladder for a fire engine.
8. Attach the ladder to the roof of the body with the help of small lozenges - fasteners.
9. Add white or blue tortillas to the cabin. Also attach the yellow headlights and black bumper - sausage.
10. Let's decorate the toy with small important details: a hose, numbers 01 and signal stripes on the side and a blue siren on the roof.

Urban transport

In addition to the fire truck, you can make another interesting transport, such as a trolley bus.

To do this, we need green and white clay and a small piece of yellow, red, black and gray clay.

1. The green bar is in the box - this will be the trolley bus.
2. Determine where the front of the car will be and stick a white flat cake there — a window, a black bumper with white headlights and a black wiper on the glass.
3. Design the bottom of the yellow and red headlights and black sausage under them.
4. We will make black cakes with a white center - the wheels and stick them to the body of the trolleybus.
5. On the sides we stick white windows of different sizes.
6. Using a toothpick, we draw the doors in the form of an accordion and other embossed lines of the case.
7. We put a gray base on the roof and stick wires into it, imitating the wires with which electric vehicles travel.

Here is a trolley bus and ready!

Passenger car

Now we will try to make a car with our own hands. Not only boys play small cars, but girls will also like this idea.

Below is a phased master class:

• Select the main color of the machine (here the machine is red) and blind a large ball from a bar of this color.
• Pull the ball into an oblong bar, round on one side.
• Make another ball and attach it on top of the bar.
• Let's form the cab of the car, smoothing all the transitions between the parts.
• We will make side, front and rear windows of blue or gray plasticine.
• We will sell with a stack in the lower part of the dredging case and insert the wheels of black clay there.
• Decorate the car with other details: headlights, wipers, long-range mirrors and numbers.

You can play with the machine!

Tank

Boys love to play with military equipment, especially with tanks. Let's try to make such a clay.

Take the green and black bars from the set and mix them to make a dark green clay.

Blind a small ball - this will be the tower of the tank.

Draw this ball into a flat and oblong rectangle.

The remaining clay form in a large rectangular block with sharp edges.

Connect the main building and the tank tower.

Prepare small balls for the wheels. For this tank we will make 10 large and 4 small ones.

1. From each ball we will make a cake and on it we will extrude an imitation of the wheel axles.
2. Let's make 2 long ribbons of average width made of gray plasticine - these will be tracks.
3. Arrange on 5 wheels in the middle of the track and one by one on each side and on top close the rest of the tape.
4. Attach the resulting structure to the body.
5. In order to depict a protective structure, we will make two ribbons of dark green plasticine and stick them over the tracks.
6. In order to make the barrel, you need to wrap a match or rod with dark green clay and insert the barrel of the gun into the tank turret.
7. From a small block we make the front part of the body and sculpt a white tortilla lantern on it from the side
8. Add some details of the combat vehicle, looking at the picture of its original: hatches and rollers on the sides.

That's all, the tank is ready to go into battle!

And finally, I would like to wish only good luck and inspiration in the modeling of machines for different purposes and the subsequent fun game!

Video

Detailed videos of workshops on how to make a tank of plasticine can be found here:

Often, the knowledge of adults about plasticine is limited to the skills of modeling mushrooms, flowers and houses. However, the child such types of art get bored very quickly. So that your little one doesn’t lose interest, we offer you several workshops on how to make a car out of clay. This trick should appeal to a young tomboy.

Sculpt, roll, fasten

Even 30 years ago, none of us could even think that the choice of clay could stump an ordinary customer. What kind of materials for modeling today did not come up with manufacturers to attract as many fans as possible! This is the usual well-known hard plasticine, and soft mass, similar to the dough called PLAY-DOH, and even ball material. Each of them is good in its own way and, undoubtedly, is useful in children's creativity.

The topic of today's conversation is not easy, because we are trying to figure out how to make a car out of plasticine. And here you cannot do without choosing the right materials:

• If you want to create a real volumetric crafts, unfortunately, the ball clay will have to be abandoned. This material is more suitable for applications, decorating and sculpting small desktop toys.
• The soft mass of PLAY-DOH, although the most popular today, is also not a good choice, if you plan to sculpt a lot of small details in your work. but finished crafts from such material will be extremely difficult to destroy. This plasticine tends to harden with long-term interaction with oxygen.
• Hard plasticine, known to us since Soviet times, is probably the easiest and most reliable option. Though he rolls up quite tight, but sticks perfectly.

Of course, besides plasticine, you will need other details for modeling, but this will be discussed in more detail in our master classes. So let's get started.

In case of fire, call 101

Junior children preschool age lessons will be useful for how to make a fire engine out of clay. During such a joint pastime, you, as a parent, can tell the child, why you need the profession of a fireman, why it is dangerous to play with matches, and on what basis this type of vehicle works.

Necessary materials:

• clay: red, yellow, black, white and blue;
• figured knife;
• board for sculpting.

Process description:

We design a passenger car with a child

This lesson will tell how to mold a regular passenger car out of clay in stages. Pay this craft Special attention , if your child is not old enough to do all the work by himself. The advantages of such a plasticine machine are that its main composition consists of large parts and very few small ones.

Necessary materials:

• red, blue and black clay;
• board for sculpting;
• figured knife.

Process description:

From clay, you can blind almost anything. And yet: what is the first thing you want to blind each boy?
Of course, the car! However, it is very possible that this girl will be interesting.

Here are a few simple schemes to learn this, and transfer the skills to your child - there will be no limit to his delight!

Let's learn how to make a plasticine car.

• Clay different colors.
• A knife for cutting clay (as an alternative, a disposable knife).
• Toothpicks for drawing additional details or contouring.
• Molds for the manufacture of parts, such as wheels. In principle, very many objects can serve as such a form: caps, corks, thimbles, rings, in a word - something can be found.

How to make a car out of plasticine

Prepare clay in three different colors. The body of the car may be of a color that you like best - but the wheels, of course, should be black.

The third color is needed for the glasses: suitable white, gray, blue or any other light shade.

Take a small rectangular piece of clay. With your fingers, crush the corners and make indentations from two sides: from the one where the hood should be located, and from behind, so that the machine can get the desired shape.

Using a toothpick, mark the semicircular contours for the four wheels. Use a knife to make small indentations in these places.

Roll out the black clay. Using molds, or manually, using a toothpick, make wheels. Insert them into the grooves in the case.

Cut out four rectangles from rolled light plasticine - for windows. Note that the side windows must be longer than the front and rear. Glue the glass in the right places.

Add the necessary details. You can make side mirrors from small pieces of plasticine.

Toothpick outline the trunk, add small bright ovals, headlights, stick on a light mug in the center of each tire.

Make wipers from thin stripes of clay or additional elements: the same toothpicks, matches, wire, etc.

The car is ready!

How to blind from plasticine truck

You need plasticine of four colors: the colors of your choice for the manufacture of the body and the cab, black for tires, light for windows, headlights and the central part of the wheels.

Blind body. This can be done nearby different ways , but the most convenient will be the following: take a brick of plasticine of the size you want to see the future body. Divide the bar into two halves horizontally. Cut out the middle of the upper part so that only the walls of the body remain, and reinforce them in the first half.

Already familiar to us - using molds - make six wheels. On black tires still stick on the core-core.

Then put the wheels on both sides of the match, a toothpick, a wand from the lollipop, or something else oblong.

The main thing is that the wand was slightly larger than the width of the body (but not significantly!). Take two sticks with wheels and put a body on them. If you did everything right, you should get a cart on four wheels.

Make a cabin from two rectangular bars of clay. It should turn out the shape of an inverted G. Pay attention to the proportions! The width of the cab must match the body, and the height must be slightly higher.

Place the cab on the third wand with wheels. Glue to the body.

Add all the necessary details: glass, headlights. Hide the tips of the sticks, which are wearing wheels, with the help of small pieces of clay. Fill the car with cargo and enjoy the result with your child!

How to blind from plasticine race car

Make a race car thanks to its convenient streamlined shape even easier! Plasticine will need only three colors: the main color of the car, white for parts and black for tires.

Roll the oval sausage out of the base color. The basis for the car is ready!

Using the form make four wheels. Do not forget that the front wheels should be slightly smaller than the rear!

Attach the wheels to the body, putting them on a small piece of clay.

Cut a long strip of white clay and stretch it along the length of the machine.

From the same black plasticine you can make a racer's head. Make a hole in the middle of the car to put it there.

It remains only to add a rear wing. Glue a flat rectangle on previously prepared plasticine balls. Well, that's all - almost like real!

The tips here are the base and foundation, but you can leave the details at your discretion. For example, there is nothing wrong with using large quantity colors, making the car more colorful. You can try yourself as a designer and decorate the doors and trunk with flowers or beautiful colorful designs.

You can make antennas or any other parts of your car from various additional materials (buttons, fishing line, wire, matches, dry pasta, and much more). Do not forget to correct the shape of the machine when sculpting, smooth corners, correct inaccuracies - because thanks to the elasticity of the material it is not at all difficult!

Sculpting from plasticine is not only very interesting, but also extremely useful. Molding develops a child's imagination, ingenuity and fine motor skills, and therefore is not only possible, but also highly desirable activity for preschoolers.

Sculpt and play with pleasure!